BearDy89 said:

Ah cool i didnt spot them, even better!!

No worries, be interested in the size and thickness of the different sections. I should be able to get the pipe bent locally.

Some pics from different angles would be brill.

Cheers Sam

Click to expand...

This one is very over the top to be honest. There is no way it needs to be that strong. When I copied it I used thinner pipe. The reason I had this made is because I couldn't find one as big a diameter as I wanted. It's a lot bigger than the ones you see on ebay etc. It would fend off a rhino.

khaos said:

Yeah if they didn't stick out there wouldn't be much point in them

And can we have some more pictures of them mate... you know just in case one of us was going to make some

I think I'll leave the pipe off of mine until I get some bent.

Click to expand...

some picks as requested of inside
just came back from blasters with some other bits ready to go to galvo inside bits easy to do just angle for front bracket and tube that fits inside chassis outrigger secured with bolt and washer.just ignore the hairy q.c. control officer that's inspecting

mal4936 said:

some picks as requested of inside
just came back from blasters with some other bits ready to go to galvo inside bits easy to do just angle for front bracket and tube that fits inside chassis outrigger secured with bolt and washer.just ignore the hairy q.c. control officer that's inspecting

Click to expand...

Cheers, those are top. As for the pictures of how my bumper attaches, you wouldn't believe the friday I had so I couldn't get them.
Got home and there was wind like a hurricane. Went round the back and my fence was down, fence posts snapped in half. So my bumper became the world's heaviest fencepost as I used the front of the Landy to hold the fence up.
I'll fix the fence tomorrow so I can move it again