Lynx24 · Feb 9, 2014

Hi there, new to the series landrovers and iv got myself a S2a
I know it's needing work done on the chassis. I want to take the body right off and strip it back to just the metal and fix the holes and seal it up properly. I have no idea were to start. I hope you can give me some pointers
Cheers
Lynx24

Freetime101 · Feb 9, 2014

Put some pics up first off - we luv pics we do

Then get yourself a decent manual, Haynes or the Land Rover "green bible" - or both.

Plenty of sound advice on here if you ever get stuck!

divie · Feb 9, 2014

Welcome along. Plenty of restoration threads on here, do a search and do not be afraid to ask even the silliest questions. We all had to start somewhere. And when you get ****ed off with it just leave it for a while and the motivation will return. Take plenty of digital pics when you start to take it to bits, it will help your memory of how to put it together again.

Lynx24 · Feb 9, 2014

Cheers for the support. Will post more when I start.

nickjaxe · Feb 9, 2014

Have you got all the tools at hand...good trolley jacks axle stands grinders and a welder...MOST IMPORTANT...I have a mig and arc ect ect...good luck and keep us posted.

Nick.

tottot · Feb 9, 2014

There is no better vehicle to learn your fixing skills on than a series landy,I started over 40 years ago on one and must have saved a small fortune in garage bills over the years and that's not just on Landrovers. You may not be able to fix everything and sometimes you are better off leaving it to a specialist. However nowadays with the internet/Landyzone we can all get in touch with know how of James Martin and other long time landy fixers, cheers.

Dr_evil · Feb 9, 2014

First thing to do....shove a small block chevy under the bonnet

oxides · Feb 9, 2014

Photograph everything - from different directions. Buy a cheap camera to do it with - one you don't mind getting dirty or scratched.

jai_landrover · Feb 9, 2014

First thing to do is decide what you want if you want it running at some point may i suggest you ignore the chevy idea

Dr_evil · Feb 9, 2014

Chevy runs bitch

jai_landrover · Feb 9, 2014

Very nice little project you have nice little 2a!!

The most sensible and easiest solution is to keep it standard not many are these days and it will pay you back in reliability and simplicity 10 times over. People say land rovers are in reliable tosh!! Correctly looked after and serviced they are brilliant!

I suggest you look up the series 11 club or indeed a local ALRC club which hold regular meets for true enthusiasts!

Good luck anything you need just ask!

owl · Feb 9, 2014

Yes keep the standard engine especially if it is a petrol, I do like a 2A first Landy I drove was a 2A with 13,000 miles on it and no dents or rust, went up the woods in it and I was hooked.

samc88 · Feb 9, 2014

Dr_evil said:
Chevy runs bitch

Several of your other v8s you stuck in it didnt though

Dr_evil · Feb 9, 2014

samc88 said:
Several of your other v8s you stuck in it didnt though

Its a numbers game

gemsdad · Feb 10, 2014

Dr_evil said:
First thing to do....shove a small block chevy under the bonnet

good idea.that will hold it up while he gets to repairing the rest of it.when finished he can weigh the chevy engine in.

aaronledwidge · Feb 10, 2014

Looks like a great little project mate, as has been said if your unsure, pictures and more pictures

Lynx24

New Member

Freetime101

Active Member

divie

Well-Known Member

Lynx24

New Member

Attachments

nickjaxe

Well-Known Member

tottot

Well-Known Member

Dr_evil

Banned

oxides

Well-Known Member

jai_landrover

Well-Known Member

Dr_evil

Banned

jai_landrover

Well-Known Member

owl

Well-Known Member

samc88

Drivels spiritual representative

Dr_evil

Banned

gemsdad

NOT BOTHERED.

aaronledwidge

New Member

Similar threads