Salisbury Nick

Well-Known Member
Hi all

My p38 is currently on its bumps. Plugged in the diagnostics and get two errors;
11DD5757-F7E8-4351-9748-1BA574974286.jpeg


and;

my ride heights are as follows;

A7550B45-06C8-43C8-8E0D-8F3279626FE1.jpeg


Any suggestions for what I should be setting for ride heights and how to fix the FL signal error?

Nick
 
If the fault is there again after you clear it, then check the connector to the FL sensor for corrosion.
If the fault clears and does not immediately come back, it could be many things but check the connectors in the EAS box and the earth points first.
 
If the fault is there again after you clear it, then check the connector to the FL sensor for corrosion.
If the fault clears and does not immediately come back, it could be many things but check the connectors in the EAS box and the earth points first.
Thanks, i’ll try that. What do you think about the ride height settings?
 
Hi all

My p38 is currently on its bumps. Plugged in the diagnostics and get two errors;View attachment 275154

and;

my ride heights are as follows;

View attachment 275155

Any suggestions for what I should be setting for ride heights and how to fix the FL signal error?

Nick
You ride height figures are not a lot different to one of mine, wade & normal height fronts are a bit higher.
The heights should be set using the measurement from wheel centre to wheel arch.
 

Similar threads