first of all get a peice of wine and put two male crimp connector red I think and then go under from passager side and u will see two wires connected to the switch by the bgearbox at the top full arm reach on yer back on the floor and pull the two connectors out and using this wire and bridge it together and then switch the intigtion on and and select reverse and if lights on then the switch is knackered if no lights summat else fuses wire breaks. etc
first of all get a peice of wine and put two male crimp connector red I think and then go under from passager side and u will see two wires connected to the switch by the bgearbox at the top full arm reach on yer back on the floor and pull the two connectors out and using this wire and bridge it together and then switch the intigtion on and and select reverse and if lights on then the switch is knackered if no lights summat else fuses wire breaks. etc
Hallooo there!
Can anyone help me with regards to non working reverse lights.
I've checked the bulbs and they are fine. Havent had time to check the fuse yet.
Is there anything else I can have a look at before I take it to an auto electrician?
Thanks all!!
yes u can do that with pliers if u got mirror or somebody standing at the rear to say yes or no yes