C

chubba

Member

• Oct 4, 2015

• #1

Had a stripped thread on my fuel pressure regulator when installing new crush type gasket.

Helicoiled the thread, is there a reason I can't reuse this gasket, yes I know its been crushed but I can't think of a reason it won't still work?

Guess I'll find out a few miles on..

 

H

Harrymattson

Member

• Oct 4, 2015

• #2

They crush to form a seal on uneven faces. Re-using a seal that has already been worked is not a good idea generally.

 

jamesmartin

Well-Known Member

• Oct 4, 2015

• #3

it doesnt work , ive tried it in desperation once

 

C

chubba

Member

• Oct 4, 2015

• #4

the surfaces are machined flat..my brain is finding it hard to understand why it won't work haha
guess there is a loss of pressure

 

jamesmartin

Well-Known Member

• Oct 4, 2015

• #5

chubba said:

the surfaces are machined flat..my brain is finding it hard to understand why it won't work haha
guess there is a loss of pressure

Click to expand...

its only clamped by 3 bolts

 

H

Harrymattson

Member

• Oct 4, 2015

• #6

How flat is flat?
Machined surfaces will only seal together where they touch. Liquid under pressure finds very small gaps to go through hence gaskets that deform to touch both surfaces to effect the seal.
Slip guages that ring together may be flat enough (before deforming them under bolt loads) to seal but everything else needs a gasket of some sorts.

 

gemsdad

NOT BOTHERED.

• Oct 5, 2015

• #7

chubba said:

the surfaces are machined flat..my brain is finding it hard to understand why it won't work haha
guess there is a loss of pressure

Click to expand...

just replace it with a new one,not worth the trouble if it does not work.

 

Yoyodyne

Well-Known Member

• Oct 5, 2015

• #8

How much is a new one?

 

C

chubba

Member

• Oct 6, 2015

• #9

true replaced with genuine..$8 AUD .. about 2 pound

 

Yoyodyne

Well-Known Member

• Oct 6, 2015

• #10

is it worth it?

 

C

chubba

Member

• Oct 7, 2015

• #11

worth it