I popped off the switch blank and peered behind. No obvious wiring connectors. Might be tied up somewhere? How does the console release?

View attachment 132557

Most of the switch/ blank is still in the console. ;). The blanking plates have a "dead" fitting that the spare connectors clip onto. The blank is the full size of switch, which looks like it's still in the console.
 
Lol Ok, better get that out, but no sign of the harness... perhaps a better view when remainder of blank is removed ;)
 
In fact, there is no retained blank in the dash: that's the whole hole! ;)

Looking at the plug under the seat, the wires all look far too thin to take a decent current: what are they for? I'll see whether I can google the wire colours...

IMG_4371.JPG


IMG_4372.JPG
 
Heated seat loom colours are brown, green and red with white tracer.

IMG_4373.JPG


Hmm. Not sure what the plug I've found is for?!?

But the long and short appears to be that my non-sitcom car does not have the prerequisite loom.

I guess that saves deep roasted posteriors! ;)
 
In fact, there is no retained blank in the dash: that's the whole hole! ;)

Looking at the plug under the seat, the wires all look far too thin to take a decent current: what are they for? I'll see whether I can google the wire colours...

View attachment 132576

View attachment 132577

You could find the seat heater wiring under the centre console. I would have thought that they are there.

The plug you found is most likely to be for the CD changer. I have one of you're interested?
 
Sadly (or a good thing?) a previous owner has changed the original head unit for an aftermarket JVC with DAB and WiFi. Streams music from my phone very nicely actually! Lol

No sign of wiring either under the seats or behind the console that I can find. Remember, this car doesn't have air con and doesn't have the loom for that either.
 
Sadly (or a good thing?) a previous owner has changed the original head unit for an aftermarket JVC with DAB and WiFi. Streams music from my phone very nicely actually! Lol

No sign of wiring either under the seats or behind the console that I can find. Remember, this car doesn't have air con and doesn't have the loom for that either.

So it must be a true poverty model then. You could install the seat wiring very easily. It's only a wire from the fuse box (F20) then to the seat switches, then on to the seat. The rest of the electrics (relay and wiring) is mounted to the seat frame. ;)
 
LOL! Thanks! If you have seats for a 3-door (four-seat version) in light grey to suit the interior I have I'll go for it - otherwise I'll enjoy the minimalism ;)
 
PS not as minimal as some of the L-series FL1s I've seen on eBay recently (innsplendid 1990s colours!): at least it has HDC! :D
 
PS not as minimal as some of the L-series FL1s I've seen on eBay recently (innsplendid 1990s colours!): at least it has HDC! :D
My first K series 3Dr FL1 had nothing, not even HDC. It was a nice silver colour on the outside but I didn't like the green plastics inside.

My next K series was a 50th Anniversary 5 door model that was fully loaded and much nicer for it.
 
The green steering wheel is a bit much I agree. I could get along with the green instrument binnacle surround, but mine being a 2001MY is rather more toned down. Just right actually.

And not having air con means that the alternator is mounted higher up on the block, so hopefully a little less vulnerable to muddy water ;)
 

Similar threads