I have a 98 300TDi and recently came into a replacement interior which allowed me to get rid of my busted drivers seat. The fronts are electric and mine were manual - would be nice to plug em in and make em adjustable.

Anyone on here done this one ?
Hoovered the internet and plundered Redhands knowledge base but no nuggets on retrofit of electric seats in a disco anywhere,

....So far the seats are fitted and I know I need the switches on the transmission tunnel and dont need an ECU. Been told that the wiring is under the seat, and not a special extra loom - but not obviously there at first glance.

Cheers

Hi,

I have retro fitted Electric seats etc to my Disco 1. Loom is under seats on later models. I had to create new loom from a later loom Biggest problem was supplying the 12v to the centre console - not too big a problem. I wired a fused 12v supply directy from the battery.

Hope this helps.

Louis

Just wired mine up today took power direct from battery to centre console used electric window switches bought secondhand on fleabay

FAIR CHUFFED !!

Gannochy said:

Just wired mine up today took power direct from battery to centre console used electric window switches bought secondhand on fleabay

FAIR CHUFFED !!

Click to expand...