Mario110 Active Member Feb 2, 2022 #1 Hi, is it possible to change the pipe (QEH102570) DIY on my TD5 110? I cannot find any instructions in the workshop manual... Best Mario
Hi, is it possible to change the pipe (QEH102570) DIY on my TD5 110? I cannot find any instructions in the workshop manual... Best Mario
v8250 Well-Known Member Feb 2, 2022 #2 Yes, it's very straight forward, if a little messy. Drain old power steering fluid remove old hydraulic hose Install new hydraulic hose and tighten correctly fill up PAS steering box and reservoir with new clean PAS fluid bleed system as per manual - it's worth routing out a PAS fluid bleeding video on YouTube to see how this is done test drive...and re-bleed if necessary
Yes, it's very straight forward, if a little messy. Drain old power steering fluid remove old hydraulic hose Install new hydraulic hose and tighten correctly fill up PAS steering box and reservoir with new clean PAS fluid bleed system as per manual - it's worth routing out a PAS fluid bleeding video on YouTube to see how this is done test drive...and re-bleed if necessary
Mario110 Active Member Feb 3, 2022 #3 Ok, sounds good. I read somewhere that the air conditioning compressor is in the way and has to be removed...
Ok, sounds good. I read somewhere that the air conditioning compressor is in the way and has to be removed...