Oldseadog

Well-Known Member

• May 31, 2018

• #1

Does anyone, off the top of their head, know the dims of the connecting pipe between the bracket holding the flexi-pipe and the clutch slave cylinder?

A stealer has managed to bend, flatten and split it and wants extra dosh to replace it as the clutch 'was working when I picked it up' !!!

The LR part number is NRC9595, but at £20+ plus fitting, I can make one up myself for nothing ... all I need are the measurements of:
a) the distance between the fittings, and
b) the diameter or radius of the two bends.

I would be eternally grateful if anyone were to be able to provide the details, as I really need her running again as soon as ...

 

mick the builder

Well-Known Member

• May 31, 2018

• #2

Hi OSD, very hard to measure and get the angles in the right plain to each other but hope this helps.

 

Oldseadog

Well-Known Member

• May 31, 2018

• #3

Many thanks for that Mick.
That diagram looks lke it's for a 300tdi whereas mine's a standard 4-cylinder where the pipe comes from the flexi bracket on the slave mounting, to the slave port.
Everything sorted ... apart from the 3/16" pipe, wot I would have sworn I had, so I'll have to keep on looking!
It will get done today, one way or another!!

 

mick the builder

Well-Known Member

• May 31, 2018

• #4

OK mate, yes, its a 300tdi. Good luck with the repair anyway.

 

Oldseadog

Well-Known Member

• May 31, 2018

• #5

Having to fork out for a new one as the local stealer has gone bust, and I can't get 3/16 pipe until Tuesday but I can get the complete pipe on Monday!
Some B'Stard upstairs don't like me at the moment!!
Cheers anyway Mick .

 

Hippo

Lord Hippo

• Jun 2, 2018

• #6

it's about 8 inches diameter and nearly 9 foot long

 

Oldseadog

Well-Known Member

• Jun 3, 2018

• #7

Hippo said:

it's about 8 inches diameter and nearly 9 foot long

Click to expand...

And it's not Ukrainian - it's a Pole!