J

Jamie Tyldesley

Member

• Aug 8, 2018

• #1

I would be very grateful if someone could suggest the best way to remove the heater/water control valve on my Series III.

Best, Jamie

 

M

Mingus

Active Member

• Aug 8, 2018

• #2

Erm....with a spanner. Seriously though....if its the one at the front of the block, remove cables then remove valve. bit of coolant will come out when you do it.

 

R

rob1miles

Well-Known Member

• Aug 8, 2018

• #3

Do you mean its siezed in?

 

J

Jamie Tyldesley

Member

• Aug 8, 2018

• #4

rob1miles said:

Do you mean its siezed in?

Click to expand...

Think so

 

J

Jamie Tyldesley

Member

• Aug 8, 2018

• #5

I’m trying to turn this anti-clockwise with a spanner. Is this wrong?

 

J

Jamie Tyldesley

Member

• Aug 8, 2018

• #6

Mingus said:

Erm....with a spanner. Seriously though....if its the one at the front of the block, remove cables then remove valve. bit of coolant will come out when you do it.

Click to expand...

Thanks for the help; it isn’t behind the block and I’ve already disconnected hoses and cables

 

jamesmartin

Well-Known Member

• Aug 8, 2018

• #7

Jamie Tyldesley said:

I’m trying to turn this anti-clockwise with a spanner. Is this wrong?View attachment 155194

Click to expand...

thats right but they can be tight and ali valve into that tube even tighter

 

J

Jamie Tyldesley

Member

• Aug 8, 2018

• #8

All fixed! Thanks for the help