David Pye

Active Member
Hi guys,

I've ordered a pair of rear discs and pads which have arrived today. I will also be replacing one of the two calipers as it has a seized piston.

What I'm puzzled about is that the discs have come with a pair of threadlocked bolts, one per disc, with a small amount of threadlock on.

I believe these bolts are for replacing the caliper to slide pin mounting bolt - but as I have only two, I am presuming I use one per caliper - is this normal, or are two missing? Also, do I put the replacement bolt in the top or bottom slide pin mounting of the caliper?

RAVE implies that the recommended method for pad replacement is to only undo one bolt and pivot the caliper upwards, but at least on the caliper I am replacing completely this will not work. So I guess my question is: Do I need two more bolts, or can I just put fresh threadlock on the existing ones?

Cheers,

David
 
Yes you can use the old bolts and you can (i wouldn't) put a very small amount of thread lock on the old bolts.
 

Similar threads