Alpinewoodsman

Well-Known Member

• Feb 4, 2020

• #21

Gmacz said:

Here is my interior handle, doesn't look the same as yours. Mine is 85 90.View attachment 199816

Click to expand...

I just used a picture I found on the interwebz that looked right, as mine is outside in the dark and snow and the camera is hiding....It does look like yours.

NiallRussell said:

ahhhh - you've got lift handle outside and pull tab inside. I have that.

Good luck finding new parts to replace bit, thats all i'm going to say

Click to expand...

Hence the idea of replace whole door, or bodge in a lift handle on both sides one... it can't make the soundproofing, watertightness or thermal insulation any worse....

 

Gmacz

Well-Known Member

• Feb 4, 2020

• #22

land rover 90-110 early 1983 to 1987 drivers side inner plate type door handle new genuine item MUC6982 . Here is one on ebay £30. Doesn't quite look the same.

 

nobber

Well-Known Member

• Feb 5, 2020

• #23

Is this the lock you need?

 

nobber

Well-Known Member

• Feb 5, 2020

• #24

Nope, thats rear door 110, it would seem this is what you want, but you really do need to check first.

https://www.ebay.co.uk/itm/114079330365

Or , buy some knackered doors off eBay and get the locks out of them. Or, rebuild the ones you have.

I wouldn't fit series doors unless you are going soft top, with a hard top they are several steps backwards! Cold, noisy, draughty, basically crap.

 

NiallRussell

Well-Known Member

• Feb 5, 2020

• #25

Alpinewoodsman said:

I just used a picture I found on the interwebz that looked right, as mine is outside in the dark and snow and the camera is hiding....It does look like yours.

Hence the idea of replace whole door, or bodge in a lift handle on both sides one... it can't make the soundproofing, watertightness or thermal insulation any worse....

Click to expand...

I rebuild my doors as I couldn't find a new one and I wanted to keep the lift up handle and tab system. It seemed to me that all the companys that did new door frames or skins did not do this type as it was not very common

 

Gmacz

Well-Known Member

• Feb 5, 2020

• #26

https://forums.lr4x4.com/topic/68245-and-theres-me-thinking-you-could-get-any-spare-part-for-a-90/
Here is how to repair them.
Mine were all ok, I have never needed to touch them yet or really think about any repairs.

 

wireman

Well-Known Member

• Feb 7, 2020

• #27

Is this any good to you?

https://www.ebay.co.uk/itm/164071271973

 

wireman

Well-Known Member

• Feb 7, 2020

• #28

wireman said:

Is this any good to you?

https://www.ebay.co.uk/itm/164071271973

Click to expand...

Now sold.