C

Colin from Hull

Active Member

• Dec 29, 2013

• #1

Hi
I have leak on one of my injectors, is it possible to replace an injector/seals, without removing everything (chamber) etc?

 

wammers

No longer with us, RIP

Donater

• Dec 29, 2013

• #2

Where is leak, and from which injector?

 

C

Colin from Hull

Active Member

• Dec 29, 2013

• #3

Hi,
If im facing my bonnet, its the third injector on the left side, and i think its coming out of the top joint (rail/injector).

 

wammers

No longer with us, RIP

Donater

• Dec 29, 2013

• #4

You are talking a petrol engine then, is that correct? If so don't have a clue sorry.

 

C

Colin from Hull

Active Member

• Dec 29, 2013

• #5

Hi
Yes its petrol!

 

jamesmartin

Well-Known Member

• Dec 29, 2013

• #6

Colin from Hull said:

Hi
Yes its petrol!

Click to expand...

you need to take plenum off

 

C

Colin from Hull

Active Member

• Dec 30, 2013

• #7

Hi,
Yes i thought so! So just follow manual, so no short-cuts?

 

jamesmartin

Well-Known Member

• Dec 30, 2013

• #8

dont know what it says in the manual but id just lift plenum off to the side without disturbing coolant pipes ,then remove trumpet housing ,the 4 securing bolts for rail and prise up enough to get injectors out of manifold and rail