gR@HaM

Well-Known Member

• Nov 12, 2013

• #1

Does anyone know whether it's possible to buy just the 2 strips of trim that illuminate 1 2 3 D N R P, mine have worn away and it looks ****e when lit up.
Here's the whole replacement unit but I only need the plastic strips. .
BTR9926LNF AUTOMATIC ILLUMINATION UNIT | Discovery: Discovery 1 1989-1998: Interior: Trim | shop | www.lrseries.com

Cheers

 

gR@HaM

Well-Known Member

• Nov 14, 2013

• #2

Anyone??

 

Georgey Dee

Member

• Nov 14, 2013

• #3

I could do with the two strips too.

 

Mark L

Well-Known Member

• Nov 14, 2013

• #4

I looked into this a while ago as mine is the same.

Entire unit is the only option, I'm afraid.

 

gR@HaM

Well-Known Member

• Nov 14, 2013

• #5

Boo, there's probably no point going second hand either

 

Mark L

Well-Known Member

• Nov 14, 2013

• #6

Get yourself a fine paint brush, a steady hand and hold your breath - fill in the gaps.

 

gR@HaM

Well-Known Member

• Nov 14, 2013

• #7

I'm actually thinking of doing that!!

 

discool

Well-Known Member

• Nov 14, 2013

• #8

Take the bulbs out, unless you need to look at the selector.

 

StuRox

Well-Known Member

• Nov 15, 2013

• #9

I had the same problem, as mine never had any when I bought it.

After hours of searching I came to the same result as above that you cannot buy them, so I made my own with the plastic you can print on, took a few attempts to get everything lined up, but works a treat now

 

Muddygamekeeper

Member

• Nov 20, 2013

• #10

StuRox said:

I had the same problem, as mine never had any when I bought it.

After hours of searching I came to the same result as above that you cannot buy them, so I made my own with the plastic you can print on, took a few attempts to get everything lined up, but works a treat now

Click to expand...

Links to plastic you can print on?

(Ps I found the thread!)

 

discool

Well-Known Member

• Nov 20, 2013

• #11

Muddygamekeeper said:

Links to plastic you can print on?

(Ps I found the thread!)

Click to expand...

All the firms that do printer supplies have this film even PC World.

We used the stuff when doing over-head presentations but not so much now that we have 'power point' on our laptops and projectors.
Better still take the old one out and get a screen printer or similar to make a few up they would sell like hot cakes on e-bay at a fiver a time.

 

gR@HaM

Well-Known Member

• Nov 20, 2013

• #12

PHP:

Muddygamekeeper said:

Links to plastic you can print on?

(Ps I found the thread!)

Click to expand...

give me a nod when you've had the first lot run off and I'll pm my address