Tremtastic said:

Hi all, new to the forum and relatively new to Landy ownership. I've had my 110 for a few months and today replaced the knackered rusty modular wheels with some new ones from Paddocks. Same size and offset, swapped existing tyres. Used new wheel nuts.

Now there's a new noise when turning at very low speed (like reversing out a drive). It's a loud groaning noise, almost like a cow mooing. Can feel it through the whole chassis, so don't think it's bearings.

Is this likely to be just new wheels settling in? Should I have greased the inside of the rims where they fit to the hub? Any other suggestions?

Click to expand...

Al2O3 said:

If the wheels are identical to the old ones and you've not changed anything else I don't see why this should be happening, but it might be your tyres (or one of them) rubbing on the radius arms. If that's the case it's a simple case of adjusting the lock stop bolts. It's easy to swing in to full lock when reversing off a drive.

Click to expand...

Tremtastic said:

Same size and offset,

Click to expand...

tottot said:

You Falklanders do like to run wide tyre's, comes with the territory.

Click to expand...