V

Varley

New Member

• Jul 10, 2012

• #1

I need to replace one of the middle reversing sensors. Is it possible to replace this without removing the rear bumper? If I lay underneath I can see the affected sensor, but cannot get in there to replace. If I remove the silver under-tray, would this allow me better access? I thought I'd ask before laying down on the wet floor!

Thanks in advance.

 

crockett007

Active Member

• Jul 10, 2012

• #2

Varley said:

If I lay underneath I can see the affected sensor, but cannot get in there to replace.

Click to expand...

Hi Varley

I think you may have answered that question. You will probably need to remove the bumper to replace the sensor.

 

V

Varley

New Member

• Jul 11, 2012

• #3

I can't get to it with the under-tray in place - would removing it allow me more access?

 

Optimus Prime

Well-Known Member

• Jul 11, 2012

• #4

is there an undertray at the back ? if so, mines been stolen !

 

crockett007

Active Member

• Jul 11, 2012

• #5

Bugger, mine too!! lol

 

V

Varley

New Member

• Jul 11, 2012

• #6

Ok, so it may not be called an under-tray, but I mean the silver part underneath he bumper, held on with 2 bolts.

 

Attachments

• 
  ff004064 copy.jpg

  40.7 KB · Views: 264

Optimus Prime

Well-Known Member

• Jul 11, 2012

• #7

not sure if it comes off separately, I'd be inclined to undo the two bolts and see first. either way, they need undoing.

got confused 'cos mines not posh enough to be the facelift version.:cheer2:

(sorry about the cheerleader smiley, baby girl is with me!)

 

Ian jones

Well-Known Member

• Jul 11, 2012

• #8

Varley said:

Ok, so it may not be called an under-tray, but I mean the silver part underneath he bumper, held on with 2 bolts.

Click to expand...

I removed the 2 bolts in question , but found the panel still retained , bumper off me thinks too