R

Rangelee

New Member

• Mar 16, 2015

• #1

Afternoon guys the next job in for the car is to remove the wood sections in the car, the door ones im guessing you remove after taking door cars off, but the ones along the glovebox and around the steering wheel are the ones not sure about advice on this be cool thanks.

 

Littelwill

Well-Known Member

• Mar 16, 2015

• #2

What are your plans for them? and i belive they just pop off (with some force) careful not to bend them tho..

 

R

Rangelee

New Member

• Mar 16, 2015

• #3

My mate is plastic dipping them gloss black for me..

 

Littelwill

Well-Known Member

• Mar 16, 2015

• #4

very nice!! Dont forget the rules... Pictures or it didnt happen

 

R

Rangelee

New Member

• Mar 16, 2015

• #5

Will do bud...deffo just pop off yeah lol??

 

dogsbody

Very senior member

• Mar 16, 2015

• #6

Rangelee said:

Will do bud...deffo just pop off yeah lol??

Click to expand...

NO
Which bits are you talking about?

 

R

Rangelee

New Member

• Mar 16, 2015

• #7

Door card strips along the top...and bit above glovebox and little bit either side of th steering wheel..

 

dogsbody

Very senior member

• Mar 16, 2015

• #8

Rangelee said:

Door card strips along the top...and bit above glovebox and little bit either side of th steering wheel..

Click to expand...

About the same advice for all of them. Get behind them and look / feel for fittings. Some have those nasty single use gripping washers. Once you're happy that you've cleared any of them push the fittings out whilst GENTLY levering from the front. More push than pull and you should get away without cracking the surface.
I might be being over-cautious but if you crack the veneer surface it might show through the piano finish. If in doubt you can probably buy these bits in simple plastic from breakers for pennies as few people want them.