P

PRO

Well-Known Member

• Apr 21, 2021

• #41

I'm in the same boat now.

 

Attachments

• 
  PXL_20210421_144811198.jpg

  418.3 KB · Views: 136
• 
  PXL_20210421_144923389.jpg

  425.8 KB · Views: 114
• 
  PXL_20210421_144926259.jpg

  376.1 KB · Views: 120
• 
  PXL_20210421_144929135.jpg

  410.6 KB · Views: 129
• 
  PXL_20210421_144932088.jpg

  438.4 KB · Views: 112

P

PRO

Well-Known Member

• Apr 21, 2021

• #42

There's more

 

Attachments

• 
  PXL_20210421_153147058.jpg

  285.2 KB · Views: 106

Nodge68

Well-Known Member

• Apr 21, 2021

• #43

Those swirl flaps cause more hassle than they're worth.

 

NeilTD4

Active Member

• May 2, 2021

• #44

Can anyone tell me what size the torx security bit is for the 4 screws that hold the ally housing to the manifold itself?

I bought a set, but none fit...!

Thank you

 

P

PRO

Well-Known Member

• May 2, 2021

• #45

Why not loose the the hose clip down which goes to intercooler with a 7mm and pull the whole thing up with the housing? there is also a screw there that holds the housing into a bracket, all easy to access

 

NeilTD4

Active Member

• May 2, 2021

• #46

Should have been clearer, but I'm swapping manifolds to a non flap version. So, need to swap the ally housing between the two...

 

Nodge68

Well-Known Member

• May 2, 2021

• #47

NeilTD4 said:

Should have been clearer, but I'm swapping manifolds to a non flap version. So, need to swap the ally housing between the two...

Click to expand...

Just pull the flaps out the manifold you have. Absolutely no need to replace the manifold at all.

 

NeilTD4

Active Member

• May 2, 2021

• #48

Have now had a proper look at those screws (with glasses on ) and have realised they are 5 pointed torx

Nodge, I've already got the 'new' manifold in stock ready...

Need to change the glow plugs at the same time as at least one has given up the ghost, so going to be a busy day...