scrappyloz
Active Member
Right i have to get this steering relay sorted as it is all that is left to do before i put it up for sale.
Over the past 3 days ive been soaking it in WD40
I removed the top and bottom steering arms
I removed the lower collar (held in with four bolts)
I removed the two stiffest bolts in the world that go through the relay
I then used a jack and a large socket and i have jacked underneath the relay till the drivers side wheel is off of the ground.
I have now just poured half a can of brake fluid on it (best penetrating oil around)
And also used a sledge hammer on the chassis dumb iron but it still refuses to move.
Anyone have anymore ideas?
Over the past 3 days ive been soaking it in WD40
I removed the top and bottom steering arms
I removed the lower collar (held in with four bolts)
I removed the two stiffest bolts in the world that go through the relay
I then used a jack and a large socket and i have jacked underneath the relay till the drivers side wheel is off of the ground.
I have now just poured half a can of brake fluid on it (best penetrating oil around)
And also used a sledge hammer on the chassis dumb iron but it still refuses to move.
Anyone have anymore ideas?