H

Henry2016

Member

• Nov 15, 2016

• #1

hi guys, I have just bought a used centre front console, as couldn't find any switches on their own!
I just want to replace the heated seat switch on the drivers side.

Can anybody tell me how to take the switch out? I don't really want to take it out from the back, so hoping that I can take them out from the front!

 

rob_bell

Well-Known Member

• Nov 15, 2016

• #2

Most switches, unfortunately, push out from behind... But I can't imagine it would be too difficult to release and raise the centre console?

 

H

Henry2016

Member

• Nov 15, 2016

• #3

the salvage place I bought it off said they come out from the front, just have to prize them out with a small screwdriver.

 

Arctic2

Well-Known Member

• Nov 15, 2016

• #4

Henry2016 said:

the salvage place I bought it off said they come out from the front, just have to prize them out with a small screwdriver.

Click to expand...

Hi Henry.
The easy solution would be to remove them from you purchased console, noting how they come out, but yes I would imagine the switch should prise out from the top using a thin small screw driver.

 

Attachments

• 
  SDC15404.JPG

  275.5 KB · Views: 427

rob_bell

Well-Known Member

• Nov 15, 2016

• #5

Just be careful not to mark the console, but yes, should be do-able

 

teddywood1

Well-Known Member

• Nov 15, 2016

• #6

i always get a knife and lay it flat and with a twist they usually come out without damaging the face

 

S

S1monm

Active Member

• Nov 16, 2016

• #7

Butter knife under the switch and lever forward, they come out easy and as the knife is flat and broad it won't mark your dash