bjornebraten

Active Member

• Nov 23, 2012

• #1

Help!! bought a set of new doorhandles.Got a instruction how easy it is.I hve screw our three torx and taken the wire away,but i can`get the handle out of the door.Please help me!!!! EMERGENCY SOS!!

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Nov 23, 2012

• #2

Any Help...??

 

Attachments

• 
  L322_FRONT_DOOR_HANDLE_1.jpg

  95.6 KB · Views: 270
• 
  L322_FRONT_DOOR_HANDLE_2.jpg

  58.8 KB · Views: 263

bjornebraten

Active Member

• Nov 23, 2012

• #3

??? Have you done it before

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Nov 23, 2012

• #4

No Sorry....

 

jamesblake

Active Member

• Nov 23, 2012

• #5

When u unscrew the bolt, DO NOT remove it as there is a spacer washer on the other side that will fall off into the bottom of the door..... And u be very lucky to get it back!!

 

bjornebraten

Active Member

• Nov 23, 2012

• #6

Thats ok.But i hve removed the screw at the end of the handle + 3 other torx on the backside of the handle,removed the wire,and still i can`t get the handle out of the door

 

Deasy

Well-Known Member

• Nov 23, 2012

• #7

Thers 2 little clips that you have to push out from inside the door skin that hold the scratch guard behind the handle, unclip them (very easy push) then the whole thing comes out, also have you undone the one 10mm bolt inside the door skin and thers a second t25torx screw behind the top rubber bung on the side of the door

 

Last edited: Nov 23, 2012

bjornebraten

Active Member

• Nov 23, 2012

• #8

Hi! I found the F...... Bl...... screw behind the window lift support Thanks to you all !

good night!

 

bjornebraten

Active Member

• Nov 24, 2012

• #9

Then were all the handles in it`s place.I think i buy some stainless scuff plates also.