SIC Projects

Member

• Feb 13, 2023

• #1

I have a heavy duty clutch on my D2 (OM606 conversion) and I have decided to fit a remote servo as it is bloody hard!!!

Has anyone fitted one to their car? What position have you put it?

Any advice would be very much welcomed.

 

Flossie

Well-Known Member

• Feb 13, 2023

• #2

@Disco1BFG has done this, disco 1 though iirc.

 

Disco1BFG

Well-Known Member

Full Member

• Feb 13, 2023

• #3

Flossie said:

@Disco1BFG has done this, disco 1 though iirc.

Click to expand...

I have.. - And I did a thread on here about it too:-

https://www.landyzone.co.uk/land-rover/servo-assisting-the-clutch-300tdi-r380.301335/

Though this is on a D1 - I'd expect there to be plenty of room under a D2 bonnet anorl

@SIC Projects - I'd be interested to see some pics of your OM606 install - if my 300Tdi ever let the smoke out, it's probably the direction I'd go.. but with a proper gearbox

 

SIC Projects

Member

• Feb 13, 2023

• #4

Disco1BFG said:

I have.. - And I did a thread on here about it too:-

https://www.landyzone.co.uk/land-rover/servo-assisting-the-clutch-300tdi-r380.301335/

Though this is on a D1 - I'd expect there to be plenty of room under a D2 bonnet anorl

@SIC Projects - I'd be interested to see some pics of your OM606 install - if my 300Tdi ever let the smoke out, it's probably the direction I'd go.. but with a proper gearbox

Click to expand...

 

SIC Projects

Member

• Feb 13, 2023

• #5

Check out -
@merc.rover on Instagram. I've just recently set up the page and more will be added as time goes on.