sonic6

New Member

• Mar 30, 2013

• #1

Hi, can anyone help,
just got my recon power steering box for my Disco 1 1997,
4 bolts going into the ps box are ok, but the other 2 holes in the power steering box are to small for the 2 bolts with locking nuts that came with the old power steering box from new, any help please,
:doh:by the way anyone going to fit a recon box, when it come to the drop arm, I used a blow torch and a big hammer and it came off in about 10 mins.

 

Last edited: Mar 31, 2013

Discophil34

New Member

• Mar 30, 2013

• #2

Just a thought but if only slightly smaller, could it be a build up of paint/ powder coat when refurbed and just needs re tapped

 

sonic6

New Member

• Mar 31, 2013

• #3

Just looked and it is a clean cut hole, when you bolt to the hole, it looks like you need to drill out about 1mm to 2mm out.
The bolt falls through the old box.
By the way, do you know how to put a photo on here ?
Many thanks Mick

 

jamesmartin

Well-Known Member

• Mar 31, 2013

• #4

sonic6 said:

Hi, can anyone help,
just got my recon power steering box for my Disco 1 1997,
4 bolts going into the ps box are ok, but the other 2 holes in the power steering box are to small for the 2 bolts with locking nuts that came with the old power steering box from new, any help please,
:doh:by the way anyone going to fit a recon box, when it come to the drop arm, I used a blow torch and a big hammer and it came off in about 10 mins.

Click to expand...

heating the drop arm ,can bugger the seal and if hot enough weaken the shaft

 

jamesmartin

Well-Known Member

• Mar 31, 2013

• #5

sonic6 said:

Just looked and it is a clean cut hole, when you bolt to the hole, it looks like you need to drill out about 1mm to 2mm out.
The bolt falls through the old box.
By the way, do you know how to put a photo on here ?
Many thanks Mick

Click to expand...

which holes ?

 

sonic6

New Member

• Mar 31, 2013

• #6

[/IMG]I had to heat it up to get the drop arm off the old box,
its the 2 holes next to the drop arm, I wanted to put a photo on but don't know how to.

 

Attachments

• 
  GetAttachment[1].jpg

  10 KB · Views: 123

Last edited: Mar 31, 2013

MPfive

Active Member

• Mar 31, 2013

• #7

sonic6 said:

I had to heat it up to get the drop arm off the old box,
its the 2 holes next to the drop arm, I wanted to put a photo on but don't know how to

Click to expand...

Get yourself a photobucket account. Load yours pics to that and then copy and past the "img" code/shortcut to here and job done

 

sonic6

New Member

• Mar 31, 2013

• #8

great, thanks

 

sonic6

New Member

• Mar 31, 2013

• #9

what I need to know can I drill out the holes a bit more, without it doing any damage to the psb ?

 

discool

Well-Known Member

• Mar 31, 2013

• #10

Or attach your pic files via the manage attachments link in additional options.