davebaird

Member

• Feb 5, 2014

• #1

Need to install a new rear wiper motor. The old one has the wiring into a round plug, whilst the new one has 2 plugs. Doing a bit of searching I can get the plug not sure about the other plug, a couple of questions
1. are the nut and grommet available separate
2. What order do the wires go to the plugs if you are looking at the motor face on

 

Oldseadog

Well-Known Member

• Feb 6, 2014

• #2

Is this for a submarine or helicopter?

C'mon, gizza clue!

Model and year might be a good start!

 

Dippypud

Never Knowingly Understood

Full Member

• Feb 6, 2014

• #3

Oldseadog said:

Is this for a submarine or helicopter?

C'mon, gizza clue!

Model and year might be a good start!

Click to expand...

If the Cherwell is flooding, it'll be a sub ...

 

Oldseadog

Well-Known Member

• Feb 6, 2014

• #4

:d :d

 

davebaird

Member

• Feb 6, 2014

• #5

sorry model is defender 90 300tdi m reg

 

Oldseadog

Well-Known Member

• Feb 6, 2014

• #6

The Green is the permanent +ive for the parking switch, the Black goes from the motor to earth.

The other two will be Red/Light Green and Brown/Light green.

IIRC both the Red/Light Green and Brown/Light green go back to the switch.

 

davebaird

Member

• Feb 6, 2014

• #7

cheers oldseadog, the red/light green and black are for the motor that I know. The green, brown/light green + black are for the parking switch its the order they connect to the plug I am after

 

davebaird

Member

• Feb 6, 2014

• #8

http://s740.photobucket.com/user/yogi2653avebaird/media/IMG_3367_zps53cc07a9.jpg.html

hope the photo comes out
this is the order I'm trying to sort out

 

Last edited: Feb 6, 2014