Process of elimination as usual. But you could start with looking at where the wires come off the B post and into the door as they have a bit of a rep for chafing through there.
Best of luck!
frostythor
Well-Known Member
have you put a new power supply on the motor to see if it actually works, just because it has power doesn't mean it works
Quite.
The motors, well the front ones at least, can be prone to getting waterlogged. Also the mechanisms can get stiff.
Have come across both of these. eminently fixable tho.
Should be easy enough to take out, dry off, lubricate and run without any mechanical resistance.
Best of luck!
Fur nuff on the motor, but being tight I'd work hard on freeing off the regulator unless the teeth have literally rusted away.
anyway, at least the diagnosis is over!
Best of luck with the rest!
