codfather79

Well-Known Member

• May 14, 2023

• #1

Afternoon all.
I'm struggling
Can anyone advise on how/where the following fix/go?

It's on a S3 lwb station wagon

 

Turboman

Mab An Gov

• May 14, 2023

• #2

codfather79 said:

Afternoon all.
I'm struggling
Can anyone advise on how/where the following fix/go?

It's on a S3 lwb station wagon

View attachment 288208

Click to expand...

Where are you fitting the belts? Front or rear?

And what sort of belts? Simple lap belts, or diagonal and lap belts, or roller belts?

 

codfather79

Well-Known Member

• May 14, 2023

• #3

I think they are for the rear!!! They came with the YRM rear floor kit. Confused.com.....!

 

Turboman

Mab An Gov

• May 14, 2023

• #4

codfather79 said:

I think they are for the rear!!! They came with the YRM rear floor kit. Confused.com.....!

Click to expand...

Assuming they are for the three forward facing seats in the back of the 12 seat SW, then.

As far as I can remember, neither of my 12 seater SWs had rear belts at all, but they were a bit older than that, a 67 and a 71, so no requirement for belts.

Afraid I have never had a YRM floor kit, but maybe someone that has used one will be along in a bit.

Best of luck. If you just want to get on, might be easier to continue with fitting the tub, and fit the belts later. It may become more obvious with the thing in place.

 

codfather79

Well-Known Member

• May 14, 2023

• #5

Thank you
The kit says they are series SW 2nd row seat belt mounting.

 

Dopey

Well-Known Member

• May 14, 2023

• #6

Wow them ribs are way out of wack, nothing lines up.... mine were too big as well I had to cut them down to fit, I didnt want to mess around with it too much as they have glalve on them, at the top you can see 2 rusted bolt things, they are for front lap seatbelts you hook them up to a loop I think, not sure I dont use them

 

codfather79

Well-Known Member

• May 14, 2023

• #7

Dopey said:

Wow them ribs are way out of wack, nothing lines up.... mine were too big as well I had to cut them down to fit, I didnt want to mess around with it too much as they have glalve on them, at the top you can see 2 rusted bolt things, they are for front lap seatbelts you hook them up to a loop I think, not sure I dont use themView attachment 288223

Click to expand...

That rib is not yet fitted
I didn't know if the seat belt mounting was fitted to it! Hence not fitting it

 

codfather79

Well-Known Member

• May 20, 2023

• #8

the good folks at YRM came to my rescue.