Crossbredflea

Member

• Mar 8, 2015

• #1

Hello All,

I have just had delivered a replacement set of rear seats for my Disco 1 (the previous owner had lost the seats!!) but they have not been supplied with any bolts to fit them back in. I have searched far and wide but cant find anywhere the size of bolt that is required!

Be very grateful if I could be pointed in the right direction

:monitor_punch:

 

auf_wiedersehen_pet

Well-Known Member

• Mar 8, 2015

• #2

Do you mean the bench seat (seats 3, 4 and 5) or the dickies (seats 6 and 7)?

The bench seat is eight M6 bolts - ebay? 20mm should be fine as they just protrude out of the captive nut under the body.

 

S

Stonesinboots

Active Member

• Mar 8, 2015

• #3

I had to do a bit of welding in that area,
and replaced the bolts with m6 they dont need to be
that long used m6 nyloc and penny washers on the other side.

 

Crossbredflea

Member

• Mar 8, 2015

• #4

Yes just the bench seats, Thank you.

 

S

SpiritMR

Banned

• Mar 8, 2015

• #5

6mm bolt.

Still got a set of proper ones if you would like them. Stripping my disco right now so.anything else gimme a shout.

 

auf_wiedersehen_pet

Well-Known Member

• Mar 8, 2015

• #6

M5,M6,M8,M10 A2 Stainless Steel Flange Hexagon Hex Head Metric Bolts / Screws | eBay

£1.40 for ten stainless - posted!