tottot

Well-Known Member

• Feb 9, 2018

• #1

Trying to get power to rear screen on my 1990 90,has not worked for years. Fuse is good,switch is good.
Where is the screen relay? My old book of lies does not even show it on the wireing diagram.

 

Discokids

Well-Known Member

• Feb 9, 2018

• #2

Is there one? Wasn't sure if it was direct Switch to window.

 

tottot

Well-Known Member

• Feb 9, 2018

• #3

Any know which is the rear window relay? Is it one in the row below fuses or is it hidden somewhere else?

 

Discokids

Well-Known Member

• Feb 9, 2018

• #4

tottot said:

Any know which is the rear window relay? Is it one in the row below fuses or is it hidden somewhere else?

Click to expand...

just looked at my old loom and there is a relay after all, it's hidden behind the binnacle.
Hrw and wipers are on a separate harness/ loom which was added to order, mine is all stilll cable tied up as it was when removed and the relay is in this area.

 

tottot

Well-Known Member

• Feb 9, 2018

• #5

Thanks Discokids,will take a look, mine must be dead as there is no click anywhere.

 

Discokids

Well-Known Member

• Feb 10, 2018

• #6

tottot said:

Thanks Discokids,will take a look, mine must be dead as there is no click anywhere.

Click to expand...

I'll stick a pick up later to give you an idea.

 

Discokids

Well-Known Member

• Feb 10, 2018

• #7

A few pics of the rear wash / wipe / hrw sub loom.

Fuses + wipe wash sw

Junction of four lots of cable

Plug to rear of car (chassis loom)

Hrw Warning light

Hrw sw

Hrw relay

Bullet connectors to plug into main loom.
N = perm unfused live
W = ign switched unfused live
B = earth (for relay and warning light, possibly wash pump, NOT hrw element or wiper motor, these earth locally )

 

tottot

Well-Known Member

• Feb 10, 2018

• #8

Thanks for that mate,will have a look when I get a [ dry ] mo and let know how I get on.

 

tottot

Well-Known Member

• Feb 18, 2018

• #9

Had a look today and found the HRW relay. Tests show no power getting to it, all though there is power going through the switch.Did not find a box with glass fuse's.
Have yet to check ignition feed.