MJI
Well-Known Member
I over measured the front ones, 0.5m too long.
I took them in over the top of the chassis rail, and the rubbing was the inner wing lip, I just bent it slightly the other way, no more rubbing.
Mine are all hydraulic hose and were roughly £20 per pipe.
LR ACE Nut
2 x LR ACE Dowty washers
14mm Banjo
2m 1/4" BSP hose
1/4" BSP hose end to male
1/4" male female swivel
I took them in over the top of the chassis rail, and the rubbing was the inner wing lip, I just bent it slightly the other way, no more rubbing.
Mine are all hydraulic hose and were roughly £20 per pipe.
LR ACE Nut
2 x LR ACE Dowty washers
14mm Banjo
2m 1/4" BSP hose
1/4" BSP hose end to male
1/4" male female swivel
