Recently changed mine - it all lined up so no real help.... but getting the bush out was an absolute mare!

In the end I used a small chisel (ok... flat blade screw driver...) and beat the crap out of it until i sheared enough of the outer metal of the bush to be able to fold it in on itself and prise it out.

It would probably have been easier to have used a vice to hold the prop but I didn't have access to one on my drive so just used the garden wall to wedge it against and slowly split the bush down it's length by hammering the screwdriver down it! Simples!

Did you fit the donut correctly? It has to go on as per the manual with bolts going alternate directions.
Mine vibrated so I changed bush and donut; still vibrated. Changed prop, ujs and a new front prop. Still vibrated! Came to conclusion it was either handbrake/drum, pinion somehow or t.box. I never solved it.

Yep, Donut is on correctly. Ihave a donor landy so I can swap props, and I've ordered 200 prop and a change of flang. I'll be trying to fix it when I get back from the UK.