pardec

Active Member

• Sep 14, 2010

• #1

I want to alter my rear lights, by swapping round the the fog lights with the stop/tail lights.

Would i need anything special, i have a spare set of bulb holders

How easy would this be to do?

 

OldIrishWulf

Well-Known Member

• Sep 14, 2010

• #2

Why wud you want to do that ?

 

Slayer

Active Member

• Sep 14, 2010

• #3

Don't know if its easy. You can find info on how to do it here

Good luck

 

pardec

Active Member

• Sep 14, 2010

• #4

OldIrishWulf said:

Why wud you want to do that ?

Click to expand...

Because where the tail lights are now the freelander looks very narrow at night.

Imo putting the stop/tail where the fog lights would look a lot better.

edit** and i have a bad habit of looking for things to tinker with:doh:

 

Last edited: Sep 14, 2010

C

CJK

Member

• Sep 14, 2010

• #5

I did this, played with the rear light locations. Fitting the reversing lights into the lower indicators was a bit of a sod as you have to drill a hole of the right diameter in the right location with no template to guide you! If you get it wrong there is no room for the bulb. But I managed it so it can't be that hard!!!!
Thinks it looks a lot better too!

And why - because I could......

Chris

 

pardec

Active Member

• Sep 14, 2010

• #6

Slayer said:

Don't know if its easy. You can find info on how to do it here

Good luck

Click to expand...

thanks for the link

Having had a read through that doesn't seem complicated, his is slighty different
putting the rear and fog togeather