Richyborofanrich

Richyborofanrich

New Member
I have just fitted some older style light clusters to my motor and now my trailer light is coming on when i indicate does anyone know if there is a older style relay or anything that can fix the prob or am i stuck with it
cheers :)
 
One side of mine does the same and the other is fine. they will allways flash once to start then should go off. They are looking at the resistance, if there is a trailer there will be more resistance so the light will light. check the bulbs are the correct rating.
 
I modified mine and it did the same, as James says its looking it the resistance, what you have done in effect is added the trailer lights to your vehicle. I got the relay from dealers, (only place I could get one from), at a cost of £25.

If I remember rightly you need to ask for an indicator conversion kit relay, or something like that.
 
you can wire them up with bog standard relays, if you have a load lying about as i did. i can send you more details if you like
 
The best way to stop the flashing trailer light on the dash from annoying you is to adjust the steering column down about half way which puts the light behind the rim of the steering wheel so you cant see it :D:D:D:D:D
 
what a difference :D:D:D:D
 

Attachments

  • 50620003.JPG
    50620003.JPG
    148.9 KB · Views: 185
  • 50620004.JPG
    50620004.JPG
    168.7 KB · Views: 188
You must log in or register to reply here.

Similar threads

Christhevanman5
Discovery 2 dill lock light
Replies
2
Views
397
Christhevanman5
Christhevanman5
L
FLICKERING BRAKE PAD WARNING LIGHT WHEN HANDBRAKE APPLIED??
Replies
10
Views
389
lrjohn
L
F
Disco 3 (LR3) Dreaded Limp Mode - Suggestions?
Replies
6
Views
469
Graculus
Graculus
K
Disco 2 Disco 2 Cruise Control Not Working
Replies
13
Views
1K
DanClarke
DanClarke
U
Discovery 2 ACE light on
Replies
4
Views
424
Unimatrix 01
U