Inch and half, does it matter?stake nut looks around 38mm definately not 32mm
It won't,thanks for socket size if you don't fit mud shield how does handbrake work
You have been told above....Badly corroded and pins no longer have any metal to hold on to,does the hub pull off easily once the nut is removed and do you know torque setting when i replace nut
RAVE are the Workshop Manuals for the Land Rover brand...Thanks for that what is the the RAVE manuals and where can i get it
If you want to prolong the agony of replacing plate, try adding large spreading washers to rear of plate where pins go through, keep them slim,Badly corroded and pins no longer have any metal to hold on to,does the hub pull off easily once the nut is removed and do you know torque setting when i replace nut
It won't,
Never looked at mine but i believe handbrake is shoes within the disc, obviously the cable needs a back plate to work so i think you can ignore that silly suggestion.... Whats up with your backing plate, Corrosion at mounts?
Should have gone to specsavers then...:cool2:no it wasnt silly ,just mistaken ,for some reason i though thread was on p38 not l322:argue: