Hello,
Second post after lurking about and reading for a long time.
This question pertains to 1992 D90, originally delivered to Spain in LHD/200Tdi configuration.
At some point in the truck's life, the previous owner replaced the rear door window with a non-heated piece. When this was done, the proper metal retaining strips were not used....just gobs of sealant and a make shift seal on the outside of the glass.
What I can not figure out is the truck only has one wiring lead coming out of the door frame to hookup to the tab on a heated window. All of the replacement windows have two tabs and all trucks I have seen have two leads coming out of the door frame, assuming one ground and one power.
The truck has a rear wipe/wash as well as the switch for the heated rear window that when engaged illuminates the light on the instrument panel. I have included a picture of the one wiring lead coming our of the frame. I have yet to take the rear door card off as the previous owner has riveted it on.
Looking for suggestions/information on the configuration I have and what I need to do to get a rear heated window to work.
Thank you,
Matthew
Second post after lurking about and reading for a long time.
This question pertains to 1992 D90, originally delivered to Spain in LHD/200Tdi configuration.
At some point in the truck's life, the previous owner replaced the rear door window with a non-heated piece. When this was done, the proper metal retaining strips were not used....just gobs of sealant and a make shift seal on the outside of the glass.
What I can not figure out is the truck only has one wiring lead coming out of the door frame to hookup to the tab on a heated window. All of the replacement windows have two tabs and all trucks I have seen have two leads coming out of the door frame, assuming one ground and one power.
The truck has a rear wipe/wash as well as the switch for the heated rear window that when engaged illuminates the light on the instrument panel. I have included a picture of the one wiring lead coming our of the frame. I have yet to take the rear door card off as the previous owner has riveted it on.
Looking for suggestions/information on the configuration I have and what I need to do to get a rear heated window to work.
Thank you,
Matthew