huffhuff

Well-Known Member

• Oct 27, 2015

• #1

Hi guys and gals,

I have fitted a switch on my rear door (same as those found on the fronts).

I want it to operate the interior lights and also be part of the 10AS alarm. Anybody know where I need to cable back to? I'm guessing the 10AS, so has anybody got the pin outs for it?

Ta muchly

 

huffhuff

Well-Known Member

• Oct 27, 2015

• #2

Ha. Just found pin outs

Ta

 

bankz5152

Well-Known Member

• Oct 27, 2015

• #3

Lol your putting yours in im turning mine off!

 

huffhuff

Well-Known Member

• Oct 27, 2015

• #4

bankz5152 said:

Lol your putting yours in im turning mine off!

Click to expand...

Ha. We should just swap cars then

Why are you doing away with it?

 

bankz5152

Well-Known Member

• Oct 27, 2015

• #5

Haha at the minute id welcome that! Clutch issues

Cant be assed to wire them all back in, the fronts are missing anyway and the rears not wired in but the alarm thinks a doors open so wont fully arm..

 

cowasaki

Well-Known Member

• Oct 28, 2015

• #6

Basically you can wire as many switches as you like. For anyone else finding this thread just connect a wire to the existing door switch wire and connect this to the door switch. The switches connect the circuit to ground when the door opens. Connecting the rear door is a good idea as it turns on the light which is useful but also if you have an alarm it will activate that too (so long as the alarm is current sensing).