Cheers

That’s a bugger I just want to find where the wires to that door lock are

Towsey

towsey956 said:

Cheers

That’s a bugger I just want to find where the wires to that door lock are

Towsey

Click to expand...

Well if you believe there’s a fault in the wiring... as each door has a multi pin electrical connection, the task would be finding it, then it’s just a matter of check the the continuity of the relevant pair of wires between each connector, my logic would be the n/s front to n/s rear, same on the o/s and forget the tail gate as it’s not a problem, if it is carry on.

Yeah that’s about what I’m wanting to do, I thought about running a wire, well 2, direct from master to problem lock or even just give problem lock a quick squirt with power probe to try it when it’s playing up but didn’t want to over do it.

It’s had 2 actuators and the mechanisms free as a bird, in fact smoother than the other side, so I thought if I can find the plug where the wires go their separate ways I could isolate that pair and go from there

Towsey