border · Aug 8, 2014

Still fixing problems here and there. Nothing to serious at the moment but I seem to fix one then find another while I am doing it.

Anyway,Just got front and rear axles off 200 TDI to refurb/ recondition, then swap them on to my 90, sometime in near future.
Mine has Classic Range Rover axles on with rear discs at the moment but the one I am going to refurb has shoes.
Would really like to keep it with discs if I can, I have read loads of posts on conversions but still have not really found the answer if it is possible to do with the axles I am using.
Will I be able to swap bits off each?? to have the discs on the rear of the refurbed ones??

Sorry if all that sounds a bit hard to understand I am still new to all this.

Thanks Kevin

cornish rattler · Aug 9, 2014

Don't think you can convert a drum axle to a disc axle as there are no fixing to fit the caliper's to, i am looking to do this on mine but will need to buy a disco rear axle to do this for the same reason but i am not sure if i need a disco 200 axle or if i can use a disco 300 rear axle though

cornish rattler · Aug 9, 2014

Don't think you can convert a drum axle to a disc axle as there are no fixing to fit the caliper's to, i am looking to do this on mine but will need to buy a disco rear axle to do this for the same reason but i am not sure if i need a disco 200 axle or if i can use a disco 300 rear axle though

harry2012 · Aug 9, 2014

I believe you can convert a Salisbury rear axle to discs.

bluehaze · Aug 9, 2014

They can be converted using several methods. Have a look on the lr4x4 forum as there are several people on there that have done it. I believe the easiest and most expensive method is to use 300tdi innards.

jamesmartin · Aug 9, 2014

harry2012 said:
I believe you can convert a Salisbury rear axle to discs.

you can i can give you a list of bits needed , the hubs from any 300tdi axle can be used other bits would need buying new or from a disc salibury axle

border · Aug 9, 2014

jamesmartin said:
you can i can give you a list of bits needed , the hubs from any 300tdi axle can be used other bits would need buying new or from a disc salibury axle

Thanks James.
Could you give me the list please.

jamesmartin · Aug 9, 2014

border said:
Thanks James.
Could you give me the list please.

first list is peculiar to 110 /130
ftc1724 half shaft
ftc1725 half shaft
ftc3306 x2 caliper bracket
ftc1740 x2 stub axle
stc1268 caliper
stc1269 caliper
stc1601 pad set
ftc3846 x2 disc
this list is just std 300 tdi disco or defender
ftc942 x2 hub
ftc859 x2 drive member
ftc3375 x2 caliper bolt
ftc3429 x4 wheel bearing
ftc3179 x2 tab washer
ftc3185 x2 wahser
bx110095m x10 drive member bolts
ftc943 x2 hub cap
circlip and other bolts etc you can use from the drum axle

border · Aug 10, 2014

jamesmartin said:
first list is peculiar to 110 /130
ftc1724 half shaft
ftc1725 half shaft
ftc3306 x2 caliper bracket
ftc1740 x2 stub axle
stc1268 caliper
stc1269 caliper
stc1601 pad set
ftc3846 x2 disc
this list is just std 300 tdi disco or defender
ftc942 x2 hub
ftc859 x2 drive member
ftc3375 x2 caliper bolt
ftc3429 x4 wheel bearing
ftc3179 x2 tab washer
ftc3185 x2 wahser
bx110095m x10 drive member bolts
ftc943 x2 hub cap
circlip and other bolts etc you can use from the drum axle

Thanks Again.
So do I need everything from both lists?? as some are coming up as 110, mine is a 90.

jamesmartin · Aug 10, 2014

border said:
Thanks Again.
So do I need everything from both lists?? as some are coming up as 110, mine is a 90.

in which case ignore it the list is to convert 110 salisbury drum to disc not 90 ,just get a 300 tdi disco axle

Chilli · Aug 14, 2014

? why change if already on discs??

border

Well-Known Member

cornish rattler

Well-Known Member

cornish rattler

Well-Known Member

harry2012

Active Member

bluehaze

Well-Known Member

jamesmartin

Well-Known Member

border

Well-Known Member

jamesmartin

Well-Known Member

border

Well-Known Member

jamesmartin

Well-Known Member

Chilli

New Member

Similar threads