cmceramics
New Member
hi all,
have got a p38 4.6hse, took it for mot and it had a sticking rear calliper so have purchased a pair of calipers (experience with my bm says they tend to go wrong at same time) a set of discs and some new pads, checked all pipes and they look like been replaced recently, just wanted to check iv got procedure correct,
1) depressurise brake system
2) change all components
3) bleed brakes
do i bleed whole sysem or just rear? or is it worth changing brake fluid throughout system while im at it? i have got the bleeding procedure through this forum,
thanks in anticipation for your help
chris
have got a p38 4.6hse, took it for mot and it had a sticking rear calliper so have purchased a pair of calipers (experience with my bm says they tend to go wrong at same time) a set of discs and some new pads, checked all pipes and they look like been replaced recently, just wanted to check iv got procedure correct,
1) depressurise brake system
2) change all components
3) bleed brakes
do i bleed whole sysem or just rear? or is it worth changing brake fluid throughout system while im at it? i have got the bleeding procedure through this forum,
thanks in anticipation for your help
chris