rayc59

Member

• Mar 28, 2020

• #1

Hi so confused can anyone tell me what the flairing for rear brake pipe running along body going into top Flexi hose. Is it double bubble single bubble or anything else 2006 rover sport diesel tried googling and so many different posts
Thanks

 

gstuart

D3 Grandad

Full Member

• Mar 28, 2020

• #2

Hi

there 4.75 Din / ISO bubble flare

used the following flare tool with great success, enclosed pic of when I done mine

hope that helps

 

gstuart

D3 Grandad

Full Member

• Mar 28, 2020

• #3

Plus these are the 3 x rear brake pipes each side

 

K

kds

Well-Known Member

• Mar 28, 2020

• #4

@gstuart beat me to it, just take it off you will soon find out which it is.

 

gstuart

D3 Grandad

Full Member

• Mar 28, 2020

• #5

kds said:

@gstuart beat me to it, just take it off you will soon find out which it is.

Click to expand...

Slow coach , lol

I did have to cut the nut off and make a new flare because it wouldn’t undo

done these when I had the pleasure of replacing my rear upper wishbones, what a job that was

 

rayc59

Member

• Mar 28, 2020

• #6

gstuart said:

Plus these are the 3 x rear brake pipes each side

View attachment 203941

Click to expand...

Thanks mate but have all these I had to cut the main one on the back of the last Flexi hose

 

rayc59

Member

• Mar 28, 2020

• #7

gstuart said:

Hi

there 4.75 Din / ISO bubble flare

used the following flare tool with great success, enclosed pic of when I done mine

hope that helps

View attachment 203940

View attachment 203939

Click to expand...

 

rayc59

Member

• Mar 28, 2020

• #8

Thanks that is the tool I was looking at but was not sure if it was bubble or double bubble

 

gstuart

D3 Grandad

Full Member

• Mar 28, 2020

• #9

rayc59 said:

Thanks mate but have all these I had to cut the main one on the back of the last Flexi hose

Click to expand...

no worries , wasn’t sure so thought if I post them just in case

 

gstuart

D3 Grandad

Full Member

• Mar 28, 2020

• #10

rayc59 said:

Thanks that is the tool I was looking at but was not sure if it was bubble or double bubble

Click to expand...

ur very welcome and indeed was also in the same boat of not knowing , was really pleased with that flaring tool and done good flares each and every time

I also used a mini tube cutter which ensured the ends were square along with not leaving any rough edges or bits as I made sure I didn’t use a hacksaw

always happy to help where I can