fiestaturbo1984
Member
So, when i first got my truck, the rear bags were perished. i bought 2 new ones and attempted to fit these. I had never done it before but with the guide from Datatak i set about doing it. All went well for the first one but as i started the second one, i put the top clip in place to hold the bag and i got my other half to turn on the ignition to try to put some air into it as i just couldnt get the bottom to locate properly. Anyway started her up...BANG... popped off the bottom plastic part.
Seriously cheesed off so bought another one and fitted that. Now i have a spare bag and i have managed to get the cap back on as it just seems to sit in place. However, i just cannot seem to get it to push down inside itself if you get what i mean. Its fully extended and when i got it, it was compressed.
Am i wasting my time?
Seriously cheesed off so bought another one and fitted that. Now i have a spare bag and i have managed to get the cap back on as it just seems to sit in place. However, i just cannot seem to get it to push down inside itself if you get what i mean. Its fully extended and when i got it, it was compressed.
Am i wasting my time?
