A

Angus Murphy

New Member

• Apr 6, 2021

• #1

Hi
The skins on my series 3 doors are in reasonable condition
Is it possible to buy galvanised frames to re-use the original skins?
Thanks
Angus

 

steve2286w

Well-Known Member

• Apr 7, 2021

• #2

Hi
You can certainly buy the frame sections, has your frames gone all over or just the bottoms, I replaced rear door bottom bits and put new skin on quite successfully,

 

R

rob1miles

Well-Known Member

• Apr 7, 2021

• #3

Give SP Panels a call and see if they will sell you the frame without the skin. They manufacture so its worth asking.
https://www.sp-4x4.com/GALVANISED_SERIES_2_DOOR_BOTTOM_337791_p/337791galv.htm

 

A

Angus Murphy

New Member

• Apr 9, 2021

• #4

steve2286w said:

Hi
You can certainly buy the frame sections, has your frames gone all over or just the bottoms, I replaced rear door bottom bits and put new skin on quite successfully,

Click to expand...

Hi, thanks yours, the whole frame is shot on all three doors but the skins are in good nick.
Where would be the best place to get the complete frames?

 

A

Angus Murphy

New Member

• Apr 9, 2021

• #5

Angus Murphy said:

Hi, thanks yours, the whole frame is shot on all three doors but the skins are in good nick.
Where would be the best place to get the complete frames?

Click to expand...

Oops sorry, not quite got the hang of the forum yet, didn’t see rob1miles post!

 

A

Angus Murphy

New Member

• Apr 9, 2021

• #6

Angus Murphy said:

Oops sorry, not quite got the hang of the forum yet, didn’t see rob1miles post!

Click to expand...

Hi again
I tried SP panels and they only do doors with skins, not frames only.
Any other suggestions?
Thanks

 

wreckrunner

New Member

• Apr 16, 2021

• #7

Buy the complete doors, remove the new skins and sell them on here and then you have nice new frames!

 

R

rob1miles

Well-Known Member

• Apr 17, 2021

• #8

Pity about SP, they were my goto bet. Have you tried YRM?