border
Well-Known Member
Not sure about Rave, but whenever I leave my parts book at garage I use this one, http://www.retroanaconda.com/landrover/
TorsionBhudda
Well-Known Member
Oldseadog
Well-Known Member
@TorsionBhudda Many thanks, as that included some of the bits which I couldn't find in the link from @border
Now all I have to do is put everything back together again
Now all I have to do is put everything back together again
Last edited:
TorsionBhudda
Well-Known Member
@TorsionBhudda Mnay thjanks, as that included some of the bits which I couldn't find in the link from @border
Noow all I have to do is puit everything bak together again
No problem @Oldseadog I also find this one useful aswell http://new.lrcat.com/
Oldseadog
Well-Known Member
Thanks again @TorsionBhudda, I'll download that later.
ASfter expecting half a day at least, of trying to locate the shafts into the diff, they both went in on the first wiggle! Unheard of!!
All I have to do now is go round and tighten everything up, top up the oil, fit the battery and then I'm ready to go adventurising again.
ASfter expecting half a day at least, of trying to locate the shafts into the diff, they both went in on the first wiggle! Unheard of!!
All I have to do now is go round and tighten everything up, top up the oil, fit the battery and then I'm ready to go adventurising again.
border
Well-Known Member
Don't Fancy measuring these Brake Pipes while your in there do you https://www.johncraddockltd.co.uk/l...e-rh-90110-with-front-discs-fromma939976.html
https://www.johncraddockltd.co.uk/l...e-rh-90110-with-front-discs-fromma939976.html
Oldseadog
Well-Known Member
Which ones, and do you have bending and flaring gear to hand?Don't Fancy measuring these Brake Pipes while your in there do you
border
Well-Known Member
These ones here https://www.johncraddockltd.co.uk/l...e-rh-90110-with-front-discs-fromma939976.html
I don't have old ones so I don't know how they run, My local landy place is gonna put ends on then I just have to bend them in to shape myself.
I don't have old ones so I don't know how they run, My local landy place is gonna put ends on then I just have to bend them in to shape myself.
border
Well-Known Member
Thanks. He said he would flare and put both ends on then I can bend it when I fit, would be a lot easier if I had an old one to compare with, but will try and go off photo, need to find photo of one fitted to see which way it goes round and up to swivel topA quick measurement of mine ... I made them 310mm overall, which allowed a bit for bends and the flares, and a bit to play with.
I imagine that the 'off-the-shelf' will be a fairly exact, waste-free length
Last edited:
Hippo
Lord Hippo
Rave disk and eggsplanation of whats ont what:
https://www.landyzone.co.uk/land-rover/rave-disk-maintenance-manual.260227/
Link below int me signature anorl
https://www.landyzone.co.uk/land-rover/rave-disk-maintenance-manual.260227/
Link below int me signature anorl
border
Well-Known Member
Is there one for earlier Defender this ones for 1999 to 2002 ??
Last edited:
Hippo
Lord Hippo
No. Select the option to download only. Think it's download, then direct download, to save to yer computer.
border
Well-Known Member
Thanks Mate, Is there one for earlier Defender this ones for 1999 to 2002 ??
neilly
Well-Known Member
Hippo
Lord Hippo
There's 3 rave disks. As above the tratter one covers several engines.
