P

P38crazy

New Member

• Mar 9, 2014

• #1

Hi everyone so my suspension suddenly decided not to raise so I did a valve block rebuild (the diagram was split) and all works fine now apart from when I turn the car off after a little while it will drop on the front left what have I done wrong? I've taken it back apart and everything is where it should be I've rebuilt them previously without any problems any help would be most appreciated it also has brand new bags all round
Thanks in advance

 

wammers

No longer with us, RIP

Donater

• Mar 9, 2014

• #2

You have a leak.

 

P

P38crazy

New Member

• Mar 10, 2014

• #3

wammers said:

You have a leak.

Click to expand...

Lol I figured that much out

 

wammers

No longer with us, RIP

Donater

• Mar 10, 2014

• #4

P38crazy said:

Lol I figured that much out

Click to expand...

Find it then, i can't do it from here.

 

P38Penguin

Active Member

• Mar 10, 2014

• #5

Spray soapy water on the air bag, it should bubble if thats the source of the leak.

mick

 

Datatek

Well-Known Member

• Mar 10, 2014

• #6

Duff new airbags are not unknown, but the favorite place would be where the pipe goes into the airbag. Give it another push. Otherwise, a dodgy height sensor can cause problems.

 

kevwill

Active Member

• Mar 10, 2014

• #7

As datatek says. If not a leak, then front height sensor. Did you recalibrate? Worth plugging in software to see what's going on, will tell you if you have a faulty sensor/signal.