Hi all re my drivers doors glass, I have removed the door card and fond that all three rivets to metal plate have broken and now the door glass has come away from its runners . to get the door glass back on the runners can I take two blue plastic bits on the mec arms that go into the runners off, fix them in the runners then clip them back onto the mec arms ? would it be better to re rivet or use nut and bolts ? I do hope all that make sense .
brianp38dse
Well-Known Member
I cant say about the blue bits, but most use nut and bolt instead of rivets, easier for next time.
thanks that's good to know I did think it mite be . thanksI cant say about the blue bits, but most use nut and bolt instead of rivets, easier for next time.
thanks that's good to know I did think it mite be . thanksI cant say about the blue bits, but most use nut and bolt instead of rivets, easier for next time.
myfirstl322
Well-Known Member
You know your getting old when you start repeating yourself......
myfirstl322
Well-Known Member
You know your getting old when you start repeating yourself......
tomcat59alan
Well-Known Member
Yo
You can but I found it easier to leave them on the arms and wedge the glass in the door and fit them to the runners.
I am finding it hard to line up the runners with the arms to get them back on
tomcat59alan
Well-Known Member
I didn't say it was easy but either is fitting the blue guide's,refitting the arns and locating the retaining clips
Job all done , I did find it easier to fit the blue bits then re attach to runners . what worked for me . Thank for the help
