myfirstl322
Well-Known Member
The answer to that is on the card closest to his chest...Yes but how did you get the filler plug out
we may never know.
we may never know.
RangeRoller dt
Well-Sprung Member
Maybe it’s like mine and still in there
Can still fill it upside down
Can still fill it upside down
shaneannigans
Member
Cold chiselYes but how did you get the filler plug out
shaneannigans
Member
Well update on gearbox, it's now give up the ghost . So my question is has anyone thought about or done a Zf gearbox to the TD6? if this is at All possible and what's involved in the conversation?
Thanks Shane
Thanks Shane
tomcat59alan
Well-Known Member
Was it @badfluffy put an manual in one? Apologies if it wasn't.
Henry_b
Think outside, no box required.
Putting the ZF5hp24 in would be a waste of time it's almost as fragile as the GM unit.
Best do either a manual conversion or rebuild the GM unit with Sonnax components.
shaneannigans
Member
Thanks to everyone for their help with this much appreciated
tomcat59alan
Well-Known Member
Wow!! The memory isn't that bad, I'll tell the missus when I remember where I left her.
Was a post on here a while ago how someone had done it.
No rush @tomcat59alanWow!! The memory isn't that bad, I'll tell the missus when I remember where I left her.
tomcat59alan
Well-Known Member
shaneannigans
Member
Hi all is it only the td6 box that fits the 3.0l
Or can I use the 4.4?
Thanks Shane
Or can I use the 4.4?
Thanks Shane
tomcat59alan
Well-Known Member
But what about the dimensions between the gearbox and the torque converter mounting plate?
badfluffy
Well-Known Member
well when i was researching fitting the manual i was told they are all interchangeable, the fly in the ointment would be the length of the box, any difference would move the transfer box and need adapted props, plus ecus would be different if using auto
