shaneannigans · Aug 13, 2021

Hi all any way to remove gearbox top up bolt? Someone has done a oil change before and over done the bolt up. worse than that it's been rounded off,
Any help would be appreciated
Thanks Shane

myfirstl322 · Aug 13, 2021

Cold chisel on the rim...failing that weld a nut to it.

I don't think you have hammer room to knock in a different sized bit.

tomcat59alan · Aug 13, 2021

Make sure you order a new one first.

shaneannigans · Aug 13, 2021

Thank you so much

shaneannigans · Aug 13, 2021

myfirstl322 said:
Cold chisel on the rim...failing that weld a nut to it.

I don't think you have hammer room to knock in a different sized bit.

Hi thanks for the help sorted now

myfirstl322 · Aug 13, 2021

shaneannigans said:
Hi thanks for the help sorted now

Well that's nice and dandy, I hope you're going to keep your extraction method all to yourself?

shaneannigans · Aug 15, 2021

Just been looking for ATF to change oil is
Comma MVATF & PSF ok for 2005 RR 5 speed gearbox
Thanks Shane

brianp38dse · Aug 15, 2021

shaneannigans said:
Just been looking for ATF to change oil is
Comma MVATF & PSF ok for 2005 RR 5 speed gearbox
Thanks Shane

You must use the correct spec stuff in the gearbox or the box will have problems, the box was designed to use a certain oil so go with that even if it is not cheep its still a lot less than a gearbox rebuild.

shaneannigans · Aug 16, 2021

brianp38dse said:
You must use the correct spec stuff in the gearbox or the box will have problems, the box was designed to use a certain oil so go with that even if it is not cheep its still a lot less than a gearbox rebuild.

Ok thanks, what is the correct oil to use ?
I've found on websites people recommend
Different oils,
Any help would be appreciated Thanks Shane

shaneannigans · Aug 16, 2021

I've been told that this would do the job, but now I'm more confused,

brianp38dse · Aug 16, 2021

@Henry_b will know more than me.

stuu · Aug 16, 2021

If its an 05 td6 here's whats specification and what i used in mine,
Iv replaced my box, and tc ect,
Box currently has 36k on it. Torque converter and cooler and lines have 25k on them now,

My oldim due a filter and fluid change whenever i find time too service the motor

rnddave · Aug 16, 2021

Is it the TD6 with GM box?

If so, then go for a Dexron III (H) ATF oil, this is unlicensed now so it isn't all that expensive, but you do take a chance by just buying the Home Bargains special uh.

The oil listed in Range Rover Workshop Manual is Texaco ETL-7045E Auto transmission fluid, but as you see from this Texaco page: https://www.texacolubricants.com/en_uk/home/products/texamatic-7045e.html - the image shows the oil defined in the workshop manual is just Dexron III (type G), the type H is backwards compatible.

shaneannigans · Aug 16, 2021

rnddave said:
Is it the TD6 with GM box?

If so, then go for a Dexron III (H) ATF oil, this is unlicensed now so it isn't all that expensive, but you do take a chance by just buying the Home Bargains special uh.

The oil listed in Range Rover Workshop Manual is Texaco ETL-7045E Auto transmission fluid, but as you see from this Texaco page: https://www.texacolubricants.com/en_uk/home/products/texamatic-7045e.html - the image shows the oil defined in the workshop manual is just Dexron III (type G), the type H is backwards compatible.

Not sure if it's GM or not what's the difference?

shaneannigans · Aug 16, 2021

rnddave said:
Is it the TD6 with GM box?

If so, then go for a Dexron III (H) ATF oil, this is unlicensed now so it isn't all that expensive, but you do take a chance by just buying the Home Bargains special uh.

The oil listed in Range Rover Workshop Manual is Texaco ETL-7045E Auto transmission fluid, but as you see from this Texaco page: https://www.texacolubricants.com/en_uk/home/products/texamatic-7045e.html - the image shows the oil defined in the workshop manual is just Dexron III (type G), the type H is backwards compatible.

Hi thanks for the help found some on net
Much appreciated thank you Shane

myfirstl322 · Aug 16, 2021

shaneannigans said:
Not sure if it's GM or not what's the difference?

Whatever you do, don't tell them what model you've got, it's just a cunning ploy so they can give you the proper answer!

tomcat59alan · Aug 16, 2021

myfirstl322 said:
Whatever you do, don't tell them what model you've got, it's just a cunning ploy so they can give you the proper answer!

Or how you got the filler plug out

if it's the GM box it'll all be out soon.

Henry_b · Aug 16, 2021

If it is the TD6 then standard DEX III can be used/

However if you have the 4.4 boat anchor, you'll need ZF lifegard 5..

shaneannigans · Aug 16, 2021

Henry_b said:
If it is the TD6 then standard DEX III can be used/

However if you have the 4.4 boat anchor, you'll need ZF lifegard 5..

Thank you for that

backinblack · Aug 16, 2021

Yes but how did you get the filler plug out

Member

Well-Known Member

Well-Known Member

Member

Member

Well-Known Member

Member

Well-Known Member

Member

Member

Attachments

Well-Known Member

Well-Known Member

Member

Member

Member

Well-Known Member

Well-Known Member

Think outside, no box required.

Member

Well-Known Member

Similar threads