pwood999 · Dec 5, 2016

Hi Guys,
Does anyone reasonable near Heathrow have tool LRT-60-004 ?

Or do I need to try filing a short taper onto one end of the bushes before using my garage press ?

Pete

Rick-the-Pick · Dec 5, 2016

Garage press is the easiest method. Just file a small taper on the leading edge & use plenty of washing up liquid. I usaully place a couple of jubilee clips around the bush to stop it squashing & the middle expanding & remove the clips as you push the bush home.

pwood999 · Dec 5, 2016

ok thanks, I will try that method.

Grrrrrr · Dec 5, 2016

Or @martyuk might have something. He's not far up the M4 from you.

martyuk · Dec 10, 2016

Thanks Grrrrr,

Sorry, not been about on forums much lately as I'm away working at the moment.... out in the US until the end of December, so not home until early January.

But, if you are still needing the tool to press radius are bushes in, then I have the LRT to do it, and a 20T press in my workshop... am happy to press the joints in if you feel like a trip out to Swindon - as I say, if you haven't got them done by then!

Sorry I can't be of service sooner!

Marty

pwood999 · Dec 10, 2016

Marty,
Thanks for the offer, but ended up filing a taper on one end of the bushes & then pressed them in with jubilee clips around to stop the outer expanding. Worked quite well in the end.

Pete

Rick-the-Pick · Dec 11, 2016

It's a great method. Been doing it like that for years.

Jake Hewitt · Dec 20, 2016

pwood999 said:
Hi Guys,
Does anyone reasonable near Heathrow have tool LRT-60-004 ?

Or do I need to try filing a short taper onto one end of the bushes before using my garage press ?

Pete

I might actually have this..

Jake Hewitt · Dec 20, 2016

I do actually, but guess it's already done! I should get around to doing mine at some point!

Grrrrrr · Dec 21, 2016

Worth remembering! Expensive!

brianp38dse · Dec 21, 2016

I was thinking the same, mental note radius arm tool in london

pwood999 · Dec 21, 2016

Jake,
Yes bushes already done & MOT passed !! For future reference, roughly where in London are you ?

Pete

Jake Hewitt · Dec 21, 2016

pwood999 said:
Jake,
Yes bushes already done & MOT passed !! For future reference, roughly where in London are you ?

Pete

Epping mate, dont have a press though, might have to use the vice. Tis a large vice though, so hopefully it'll do the trick.

pwood999

Well-Known Member

Rick-the-Pick

Active Member

pwood999

Well-Known Member

Grrrrrr

Technician, Bodgit & Scarper Ltd

martyuk

Well-Known Member

pwood999

Well-Known Member

Rick-the-Pick

Active Member

Jake Hewitt

Active Member

Jake Hewitt

Active Member

Grrrrrr

Technician, Bodgit & Scarper Ltd

brianp38dse

Well-Known Member

pwood999

Well-Known Member

Jake Hewitt

Active Member

Similar threads