marti 300tdi

New Member
Hi, I have sourced a discovery radio / tape with the code however when I entered the code the radio displays "121". Is this reversable with leaving it disconnected through time or is it knacked, Every time I switch it on it always displays "121" and no sound comes out, any help is appreciated folks.
 
I haven't a clue what 121 is, but depending on what head unit u have u may have a BND button so press that for aprox 3 seconds and 'code in' appears the unit has to be powered.
The other model of head unit the one with a multi CD control you should have wait or code displayed. If you have entered an incorrect code then head unit needs a permanant supply so the delay can time out and allowing u to re-enter the correct code.
 
Hi, Well I did try this yesterday but it made no difference, I have however ordered a new tensioner from fleebay last week but with the post being so slow getting up to Edinburgh and the fact I could not put up with the squeek any longer decided to give the penny trick a go; maybee my pully is past it, I hope it comes tommorrow. I have also ordered a suspension lift kit & 4 new Marix Panther tyres so looking forward to getting allthis fitted for the snow we have at the mo.
 
Well, I went to fit the tensioner today and found that the 15mm retaining bolt to be stripped and the aluminium threads came out with the bolt :mad: After some minor drilling and installing a helicoil & a dab of loc-tight all is fitted including a new belt, quite easy and accessible job I must say despite the threaded bolt.
Upon start up it still squeels!!!!!! I have checked the pullys and all are tight:confused: any advice folks????
PS best wishes for 2011 to all on the forum.
 
Well, I went to fit the tensioner today and found that the 15mm retaining bolt to be stripped and the aluminium threads came out with the bolt :mad: After some minor drilling and installing a helicoil & a dab of loc-tight all is fitted including a new belt, quite easy and accessible job I must say despite the threaded bolt.
Upon start up it still squeels!!!!!! I have checked the pullys and all are tight:confused: any advice folks????
PS best wishes for 2011 to all on the forum.

I had a problem with mine squeeling, done the penny trick, still the same ! tried a new tensioner , same problem, put a new belt on, still squeeled.
Later I found the belt was fraying, after more inspection, I found it was the power steering pump, replaced it & now it sounds like a new vehicle, cured.
 

Similar threads