jaydisco4x4
Member
Bought a d2 from auction with no radio installed,I’ve just bought a replacement from Amazon, it powers up but I’m not getting any noise at all from the speakers, looking for any advice that would help thanks
Western Slope Rover
Well-Known Member
It can be due several reasons. Do you have the proper wiring harness? Is the new radio wired properly to the Amp? Cell phone mute can cause issues, as well. Google is your friend in this case.
discool
Well-Known Member
As Western above…
Also, D2 loudspeakers are are driven from a separate amplifier… model dependant I believe, therefore your new head unit requires an output for the amp from it, and then suitably adjusted to match the amp, if you head unit has the facility that is and also compatible.
A genuine LR head unit for your model of D2 should be plug n play, if the wiring existing wiring hasn’t been interfered with that is.
Also, D2 loudspeakers are are driven from a separate amplifier… model dependant I believe, therefore your new head unit requires an output for the amp from it, and then suitably adjusted to match the amp, if you head unit has the facility that is and also compatible.
A genuine LR head unit for your model of D2 should be plug n play, if the wiring existing wiring hasn’t been interfered with that is.
ronsealdeath
Sagging Member
Have you got your hearing aid in?
jaydisco4x4
Member
I come down with a bad case of covid and was in a bad way, only just getting back to working on it now
jaydisco4x4
Member
Thanks for the replies appreciate it
