C

COOL CRUISER

New Member
Radio Code
:cool: hello all. hope someone will be able to offer me some advise that will do the trick!
i have a rangerover P38 with a factory fitted AMR2672 / PU-9887A DIVERSITY RADIO / CASSETTE / AND CD PLAYER. that will not let the code in. according to the rangerover hand book of entering it.. but having said that the one they show you in the handbook is a different model to the one i hace fitted but it is a factory fitted radio as earlier discribed. i have checked the code information from the main dealer from there computor security information for that registration mark.so the code is right. the book says to wait for code in then say the code is 1645 to pressthe presellect button 1 first then use the manual tuner up and down untill the display shows the first didgit 1 and then to set each ofther number the same way but to press the preset button for each number to comfirm it untill they are all in then the radio is suspose to bleep then except the code. but what is happening is. you press number one pre sellect button to start the process to allow you to use the manual tuner up & down control to reach the code didgit. but as soon as you press the number 1 pre sellect button it enters nuber 1 traite away anyway and wont bring any didgits up with the manual tuner control. so i have just used the pre sellect buttons to enter the code pressing the mode in at the same time or the other buttons buy the mode button but the code numbers / didgits just sits there on the display. so i am wondering if there is a different way of entering the code for this model radio. so can anyone help befor i give it a big f---ing scotch kiss goodby ! :flame2:
 
COOL CRUISER said:
Radio Code
:cool: hello all. hope someone will be able to offer me some advise that will do the trick!
i have a rangerover P38 with a factory fitted AMR2672 / PU-9887A DIVERSITY RADIO / CASSETTE / AND CD PLAYER. that will not let the code in. according to the rangerover hand book of entering it.. but having said that the one they show you in the handbook is a different model to the one i hace fitted but it is a factory fitted radio as earlier discribed. i have checked the code information from the main dealer from there computor security information for that registration mark.so the code is right. the book says to wait for code in then say the code is 1645 to pressthe presellect button 1 first then use the manual tuner up and down untill the display shows the first didgit 1 and then to set each ofther number the same way but to press the preset button for each number to comfirm it untill they are all in then the radio is suspose to bleep then except the code. but what is happening is. you press number one pre sellect button to start the process to allow you to use the manual tuner up & down control to reach the code didgit. but as soon as you press the number 1 pre sellect button it enters nuber 1 traite away anyway and wont bring any didgits up with the manual tuner control. so i have just used the pre sellect buttons to enter the code pressing the mode in at the same time or the other buttons buy the mode button but the code numbers / didgits just sits there on the display. so i am wondering if there is a different way of entering the code for this model radio. so can anyone help befor i give it a big f---ing scotch kiss goodby ! :flame2:
Click to expand...

This is a common problem, apparently the thing to do is to leave the ignition and radio on for 90 minutes before trying to put the code in. Then it should all work OK.

My guess is that if the battery has been disconnected for a while, the radio powers up in "invalid code just entered" mode which means that you have to wait for an hour before giving it another try.
 
bwarb said:
This is a common problem, apparently the thing to do is to leave the ignition and radio on for 90 minutes before trying to put the code in. Then it should all work OK.

My guess is that if the battery has been disconnected for a while, the radio powers up in "invalid code just entered" mode which means that you have to wait for an hour before giving it another try.
Click to expand...
many thanks for the reply. but it does just come up with code in. in the display. i use the short cut from waiting all that time buy switching the ignition to position 1 then removing number 1 and number 8 fuse then replace them and give it 1 hour and the code in comes up ps you must have the radio switched on all the time.saves hours if you make a muck up of it. anyway thanks again. regards ! :cool:
 
i posted on yr other fred!!! i would check the code you have is for the radio rather than for the car's chasis number, LR have a habit of recording everything to the chasis number and forgetting that things don't last forever!!!
 
gavbriggs said:
i posted on yr other fred!!! i would check the code you have is for the radio rather than for the car's chasis number, LR have a habit of recording everything to the chasis number and forgetting that things don't last forever!!!
Click to expand...
hello gavbriggs. sorry i did not see the first thread you posted. i am tending to think you are right. only thing now is how the heck does it come out of the console. as with my other cars as you know you had a 2 pronged fork for each end but from sitting here out of memory i dont recall seing these holes for the prongs to go in. anyway gavin. thanks again for the info. regards pete.
 
If you are having trouble, drop me a line (see my profile). Have you tried holding the band button in ?
 
Davie B said:
If you are having trouble, drop me a line (see my profile). Have you tried holding the band button in ?
Click to expand...
well dave i have not tried to remove the radio as yet. i will give a week or so for the sugestions to come in first. i have tried holding the band button in aswell as the mode but like i say the min you touch the presett 1 button then it enters that on the display.there must be loads of rangies with this model of radio in. it is a pain in the arse clarion diversity model. anyway will do dave. thanks.:)
 
COOL CRUISER said:
well dave i have not tried to remove the radio as yet. i will give a week or so for the sugestions to come in first. i have tried holding the band button in aswell as the mode but like i say the min you touch the presett 1 button then it enters that on the display.there must be loads of rangies with this model of radio in. it is a pain in the arse clarion diversity model. anyway will do dave. thanks.:)
Click to expand...
If your code is 1456, press preset 1, then 4,5 and finally 6, it then springs into life, no need to press anything. I just realised my profile doesnt say that i run the Clarion service centre !!
 
dave, you run a service centre for the very radio he needs advice on!!!!

not rocket science is it????


lol!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 
Davie B said:
are we sorted ????
Click to expand...
hi dave again got radio sorted recoded works great sounds great except the CD sometimes misses a beat then repeats abit . can this do any damage to the CD player i.e the laser or anythink. cheers dave let me know if you have any idears. pete. :cool:
 
Hi Davie,

I am having the exact same issue with the exact same radio.

I have learned about the BND trick ... thank you.

However, no matter what I do, my 4564 code is not accepted. It takes me back to the ---- lines.

My serial number is: CR0195S0009096

Any advice?

Thank you in advance,
Eric
 
Help would be much appreciated.

I do not mind purchasing a different system if needed or paying for a solution.

Again, thank you in advance.

Best regards,
Eric
 
You must log in or register to reply here.

Similar threads

O
Freelander 1 radio not accepting correct code
Replies
0
Views
570
Oilydiff
O
DollyBird
Engine disabled, keys not working, tried the guide “Re-synching the Range Rover P38 diesel engine with the Solved - BECM using a Nanocom” no luck
Replies
9
Views
985
DollyBird
DollyBird
feyniriel
P38 engine disabled for no reason, please help!
Replies
5
Views
939
pwood999
pwood999
R
P38 Alpline Radio Code
Replies
3
Views
1K
rickead2000
R
M
P1180 code
Replies
2
Views
1K
Mbeal2024
M